六层4500平米北方大学学生公寓(宿舍)建筑结构设计

以下是资料介绍,如需要完整的请充值下载. 本资料已审核过,确保内容和网页里介绍一致.  
无需注册登录,支付后按照提示操作即可获取该资料.
资料介绍:

六层4500平米北方大学学生公寓(宿舍)建筑结构设计(任务书,开题报告,计算书16000字,CAD建筑图结构图12张)
摘   要
本设计主要分为两大部分:第一部分为建筑设计。建筑设计是在总体规划的前提下,根据任务书的要求,综合考虑基地环境,使用功能,结构施工,材料设备,建筑设计及建筑艺术问题,解决建筑物的使用功能和空间的安排。依据建筑物的概念,建筑方针的原则,完成了拟建公寓楼以下几方面的设计:建筑总平面设计,建筑布局,基本单元设计,公共部分设计,空间组合设计,屋面设计,建筑立面设计及建筑防火设计等等。
第二部分为结构设计。结构设计由框架设计,基础设计等组成。该建筑的抗震设防烈度为7度,抗震等级为三级,考虑水平地震作用对横向框架的影响。竖向荷载作用下,横向框架内力计算采用弯矩分配法,而内力组合比较了竖向荷载组合和竖向荷载与地震力组合时对框架梁,柱产生的不利影响,取两者中较大值对框架梁,柱进行截面设计。

关键词:建筑设计 建筑规范 内力组合

ABSTRACT
This design is divided into two major parts mainly: The first part is the architectural design。The architectural design is on the premise of master plan, according to the request of task book, considering the base environment synthetically, the function of use, the structure constructs, material equipment, architectural design and artistic question of the building , solve the function of use of the building and arrangement in the space. Whether according to concept design of building, principle policy ofbuilding,the design should finish the following aspects. The total planar design of the building , the overall arrangement of the building , the elementary cell is designed, the public part is designed, the space is made up and designed, the roofing is designed, the elevation design of the building and building fire prevention and design etc..
The second part is structural design.Structural design is consisted by design of frame, foundation designing etc. making up. Should build provide fortification against earthquakes earthquake intensity 7 , antidetonation grade for being tertiary , consider horizontal earthquake function impact on horizontal frame. Vertical to load function, horizontal frame internal force calculate and adopt the curved square to assign France, and internal force make up vertical to is it make up and not vertical to load with earthquake strength setting a roof beam in place to frame when making up to load, adverse effect that post produce, fetch the two great value set a roof beam in place to frame, post design the section.
Key words: Architectural design; Norm of the building; Internal force association.
 
第1章 工程概况
某六层框架结构,建筑平面图如施工图所示,采用钢筋混凝土全现浇框架结构设计。

基本设计资料
     本工程为北方大学学生公寓,建筑面积4500m2左右,层数为六层。使用要求:每层设置一个管理室;每层设置一个厕所,满足内部使用要求;每层设置一个公共活动室,建筑面积不得小于30 m2。区基本烈度为7度(近震)。
1.1  建设地点
某市
1.2  内容
华北大学学生公寓建筑结构设计
1.3  气象资料
①主导风向:全年为西北风,夏季为东南风,基本风压 =0.4 。
②雨雪条件:年降雨量1450 、日最大降水强度210 /日;最大积雪80 。基本雪压:0.3KN/m2
1.4  工程地质资料
拟建场地原始地形为湖塘洼地,后经人工填筑而成,地形平坦,场地分层情况如下:第1层(地基表面)为松散杂填土,土层厚1.5m;第2层为灰色粘土,土层厚8m;第3层为褐色粉质粘土,土层厚4m(未揭穿)。
 

六层4500平米北方大学学生公寓(宿舍)框架结构设计
六层4500平米北方大学学生公寓(宿舍)框架结构设计
六层4500平米北方大学学生公寓(宿舍)框架结构设计
六层4500平米北方大学学生公寓(宿舍)框架结构设计
六层4500平米北方大学学生公寓(宿舍)框架结构设计
六层4500平米北方大学学生公寓(宿舍)框架结构设计


目   录
第1章 工程概况    - 1 -
1.1  建设地点    - 1 -
1.2  内容    - 1 -
1.3  气象资料    - 1 -
1.4  工程地质资料    - 1 -
1.5  水文地质资料    - 2 -
1.6  抗震设防要求    - 2 -
1.7  基本设计资料    - 2 -
1.8  基本参数    - 2 -
第2章 框架结构布置及简图    - 3 -
2.1  梁柱截面尺寸的初步确定    - 3 -
2.2  框架梁柱的线刚度计算    - 3 -
第3章 荷载计算    - 6 -
3.1  恒载标准值    - 6 -
3.1.1  屋面    - 6 -
3.1.2  各层走廊楼面、标准层楼面    - 6 -
3.1.3  自重计算    - 6 -
3.2  活荷载标准值计算    - 8 -
3.2.1  屋面和楼面活荷载标准值    - 8 -
3.2.2  雪荷载标准值    - 8 -
3.3  风荷载计算    - 11 -
3.3.1  风荷载作用下的位移验算    - 12 -
3.3.2  风荷载作用下框架侧移计算    - 14 -
第4章 内力计算    - 15 -
4.1  恒载作用下的内力计算    - 15 -
4.1.1  荷载计算    - 15 -
4.1.2  梁端弯矩计算:    - 20 -
4.1.3  分配系数    - 20 -
4.1.4  杆端弯矩计算    - 21 -
4.2  活荷载作用下的内力计算    - 30 -
4.2.1  框架梁上梯形荷载化为等效均布荷载    - 30 -
4.2.2  活载作用下的杆端弯矩计算    - 31 -
4.2.3  活荷载作用下的弯矩图:    - 33 -
4.2.4  活载作用下梁端剪力及柱轴力计算    - 35 -
4.3  风荷载作用下的内力及侧移计算    - 39 -
4.3.1  各楼层风荷载计算     - 39 -
4.3.2  风荷载作用下的侧移计算    - 39 -
4.3.3  风荷下柱弯柜计算    - 40 -
4.3.4  风荷载作用下柱剪力及柱轴力    - 43 -
4.4  地震力作用下的内力及侧移计算    - 45 -
4.4.1  梁柱的线刚度    - 45 -
4.4.2  横向框架自振周期    - 46 -
4.4.3  横向地震作用    - 47 -
4.4.4  水平地震力作用下横向框架的内力计算    - 48 -
第5章 内力组合    - 54 -
5.1梁柱内力组合    - 54 -
5.2内力调整    - 57 -
5.1.1  强柱弱梁的要求    - 57 -
5.1.2  强剪弱弯的要求    - 58 -
第6章 配筋计算    - 61 -
6.1  框架柱截面设计    - 61 -
6.1.1  轴压比计算    - 61 -
6.1.2  截面尺寸复核    - 62 -
6.1.3  正截面受弯承载力计算    - 62 -
6.2  框架梁截面设计    - 65 -
6.2.1  正截面受弯承载力计算    - 65 -
6.2.2  斜截面受剪承载力计算    - 67 -
6.2.3  次梁的配筋计算    - 68 -
6.3  板设计    - 69 -
6.3.1  屋面板荷载计算    - 69 -
6.3.2  楼面板设计    - 71 -
第7章 基础设计    - 73 -
7.1 基顶内力组合值计算    - 73 -
7.2 外柱(A柱)独立基础计算    - 74 -
7.2.1 初步确定基底尺寸    - 74 -
7.2.2 基础底面配筋计算(按基本组合确定)    - 76 -
7.3  B、C柱联合基础计算    - 76 -
结 论    - 79 -
致谢    - 80 -
主要参考文献目录    - 81 -