无导向简单落料模具的动画制作(Proe三维图,仿真视频)

无导向简单落料模具的动画制作(Proe三维图,仿真视频)(任务书,中期检查表,论文说明书8000字,Proe三维图,仿真视频动画)
摘    要
本设计题目为无导向简单落料模具的动画制作，体现了运用三维建模软件Pro/ENGINEER Wildfire对落料模具的设计、制作、装配和动画演示过程，极有一定的意义，通过对该零件模具的设计，进一步加强了设计者落料模设计的基础知识，为设计和演示更复杂的落料模具的动作过程做好了铺垫和吸取了更深刻的经验。
本设计运用冲压工艺与模具设计的基础知识，首先进行了落料模的工艺分析，为动画部分各零件先后运动的次序奠定了基础，然后运用Pro/ENGINEER Wildfire对落料模各零件经行了实体生成，为装配做好了准备，最后介绍了动画的制作过程，使学习者对拉深模具的动作过程有了更进一步的理解。
本设计主要运用了三维建模软件Pro/ENGINEER Wildfire，在设计过程中不仅巩固了落料模具的基础知识，更进一步的学习和掌握了运用Pro/E进行动画设计的方法和步骤，使软件和书本结合起来，两者相互映衬，意义重大。

关键词：落料模    装配    动画  

The animation of the blanking die
Abstract
The design of production, assembly and demonstration of the process of blanking die are embodied on this injection mould design of the cylinder subject line blank holder cone pieces blanking die animation with Three-dimensional modeling software Pro / ENGINEER Wildfire through the design of the die, The designer’s foundation knowledge of blanking die design is reinforced and is able to design and demonstration of more complex movements drawing mould through the design.
Through the foundation knowledge, firstly, the technology of blanking die is analyzed to movement the order of the animation part of the various parts, Secondly,with the line of entities generated,it is readyed to assembly for the parts of blanking die through the line of entities generated by use of Pro / ENGINEER Wildfire. Lastly the character of the part is introduced about the production process of animation,though it, the students would have further understanding of the process of blanking die movements.
This design not only study the design process but also consolidate the basic knowledge by use of the design of three-dimensional modeling software Pro / ENGINEER Wildfire,t the background of the two each other against have a great significance.

Keywords: Blanking Die    Assembly    Animation

 

目  录
第1章   绪论…………………………………………………………………1
1.1  国内模具的现状和发展趋势…………………………………………1
1.1.1  国内模具的现状……………………………………………………1
1.1.2  国内模具的发展趋势………………………………………………2
1.2  国外模具的现状和发展趋势…………………………………………3
第2章  模具工作原理分析…………………………………………………5
2.1该模具的冲裁过程……………………………………………………6
2.2无导向冲裁模具的特点…………………………………………………6
3.无导向落料模具零件装配及和仿真运动参数的设置……………………7
3.1无导向落料模具零件装配………………………………………………7
3.2仿真运动的参数设置……………………………………………………18
3.3模拟仿真运动效果………………………………………………………22
4.设计总结 …………………………………………………………………24
致谢…………………………………………………………………………25
参考文献 ……………………………………………………………………26

插图清单
1.    图1-装配图   ……………………………………………………………5
2.    图2-底座零件   …………………………………………………………8
3.    图3-底座零件装配图   …………………………………………………9
4.    图4-导板装配图 ………………………………………………………10
5.    图5-卸料板一端装配图 .………………………………………………11
6.    图6-卸料板装配效果图  .…………………………………………………12
7.    图7-一端固定螺钉的装配图.  .……………………………………………13
8.    图8-固定螺钉的装配   ……………………………………………………13
9.    图9-螺钉固定装配效果图   ………………………………………………15
10.    图10-凸模装配图   ………………………………………………………16
11.    图11-条料放置图   ………………………………………………………17
12.    图12-零件位置更新图   …………………………………………………19
13.    图13-动作过程生成图   ………………………………………………21
14.    图13-生产顺序图  ……………………………………………………23