AT89C51的特性、原理和结构

以下是资料介绍,如需要完整的请充值下载. 本资料已审核过,确保内容和网页里介绍一致.  
无需注册登录,支付后按照提示操作即可获取该资料.
资料介绍:

功能特性概述:
AT89C51提供以下标准功能:4k 字节FLASH闪速存储器,128字节内部RAM,32个I/O口线,2个16位定时/计数器,一个5向量两级中断结构,一个全双工串行通信口,片内振荡器及时钟电路。同时,AT89C51降至0Hz的静态逻辑操作,并支持两种可选的节电工作模式。空闲方式体制CPU的工作,但允许RAM,定时/计数器,串行通信口及中断系统继续工作。掉电方式保存RAM中的内容,但振荡器体制工作并禁止其他所有不见工作直到下一个硬件复位。
引脚功能说明
•Vcc:电源电压
•GND:地
•P0口:P0口是一组8位漏极开路型双向I/O口,也即地址/数据总线复用。作为输出口用时,每位能吸收电流的方式驱动8个TTL逻辑门电路,对端口写“1”可作为高阻抗输入端用。
在访问外部数据存储器或程序存储器时,这组口线分时转换地址(低8位)和数据总线复用,在访问期间激活内部上拉电阻。(优秀毕业设计:www.2bysj.cn)
在Flash编程时,P0口接受指令字节,而在程序校验时,输出指令字节,校验时,要求外接上拉电阻。

Description
The AT89C51 provides the following standard features: 4Kbytes of Flash, 128 bytes of RAM, 32 I/O lines, two 16-bittimer/counters, a five vector two-level interrupt architecture,a full duple ser -ial port, on-chip oscillator and clock circuitry.In addition, the AT89C51 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters,serial port and interrupt sys -tem to continue functioning. The Power-down Mode saves the RAM contents but freezes the oscil -lator disabling all other chip functions until the next hardware reset.
Pin Configurations
Block Diagram
Pin Description
VCC Supply voltage.
GND Ground.

全文 8500字