基于相变材料的电动汽车锂离子电池散热分析

基于相变材料的电动汽车锂离子电池散热分析(任务书,开题报告,外文翻译,文献摘要,论文说明书20000字)
摘要
近年来，传统汽车的不断发展不仅仅给人类带来了福利，同时也带来了不少的麻烦。一方面，传统汽车会排放大量的废气及有害气体，对环境污染严重；另一方面，由于传统汽车主要以柴油和汽油作为燃料，而石油、煤炭等都是不可再生资源，这些年的大量使用使不少资源已经到了接近匮乏的地步。而我国在这些年来，汽车行业迅猛发展，汽车的保有量已经高居世界第一，也已经成为了世界第二大石油消耗国。然而，中国的石油的产出量完全没法满足对石油的需求量，需要大量石油进口。同时，前些年国内雾霾天气严重，空气污染甚至已经到了严重污染的地步，这其中很大一部分原因就是汽油和柴油的过度消耗。
从某种意义上来说，电动汽车的发展及普及可以改善现阶段环境污染问题以及能源枯竭问题。然而由于电动汽车的技术还不够完善，在现阶段电动汽车还是存在很多问题，因而暂时还无法普及于汽车市场。比如，作为电动汽车的主要供能来源，电池在高温之下不仅会导致寿命变短，电功率降低，严重情况下还会产生不小的安全隐患。本文就这一问题，将讨论电动汽车锂离子电池利用相变材料进行散热。
锂离子电池的工作原理大致为锂离子在电池正负极之间脱落和镶嵌，在这个过程中会产生热量，有几种不同的传热方式，可能会产生反应热、副反应热、焦耳热、极化热等多种不同热量，而本课题要做的研究便是限制锂离子电池产热过多。
根据热力学的几个基本定律和电池的基本产热理论，可以研究出锂离子电池的散热方法。
电动汽车锂离子电池的散热方式分为多种，包括风冷、水冷、相变材料散热等等，几种散热方式各有利弊。笔者在对比分析各种方式之后，决定选用相变材料作为电动汽车锂离子电池的散热介质，并以此讨论电动汽车锂离子电池的散热。
选定温度范围、初始条件和边界条件后，本文选用SolidWorks软件先对单体电池进行建模和网格分析，在对整个电池包进行建模，用SolidWorks的flow simulation插件对锂离子电池包进行仿真并得出结果，以完成对锂离子电池的散热的要求。
关键词：电动汽车；锂离子电池；相变材料；电池散热
 
Abstract
In recent years, the continuous development of traditional cars has not only brought benefits to human beings, but also brought a lot of trouble. On the one hand, traditional cars emit a large amount of exhaust gas and harmful gases, which are serious to the environment; on the other hand, because traditional cars mainly use diesel and gasoline as fuel, and oil and coal are non-renewable resources, they are used in large quantities in these years. A lot of resources have reached the point of being close to scarcity. In the past few years, the automobile industry has developed rapidly, and the number of cars has been ranked first in the world. It has also become the world's second largest oil consumer. However, China’s oil output is completely unable to meet the demand for oil and requires a large amount of oil imports. At the same time, domestic smog weather was severe in the past few years, and air pollution has even reached the point of serious pollution. A large part of this is due to excessive consumption of gasoline and diesel.
In a sense, the development and popularization of electric vehicles can improve environmental pollution problems and energy depletion at the current stage. However, because the technology of electric vehicles is still not perfect, there are still many problems in electric vehicles at this stage, so it is not yet popular in the automobile market. For example, as the main source of energy for electric vehicles, the battery will not only lead to shorter life, but also lower electric power. In severe cases, there will be no small safety hazards. In this paper, we will discuss the use of phase change materials for heat dissipation in electric vehicle lithium-ion batteries.
The working principle of lithium-ion battery is roughly that lithium ion is detached and inlaid between the positive and negative electrodes of the battery. In this process, heat is generated. There are several different heat transfer modes, which may generate reaction heat, side reaction heat, and Joule heat. A variety of different heats, such as polarization heat, and the research to be done in this topic is to limit the excessive heat production of lithium-ion batteries.
According to several basic laws of thermodynamics and the basic heat production theory of batteries, the heat dissipation method of lithium ion batteries can be studied.
The cooling methods of lithium-ion batteries for electric vehicles are divided into various types, including air-cooling, water-cooling, phase-change materials, etc. Several heat dissipation methods have their own advantages and disadvantages. After comparing and analyzing various methods, the author decided to use phase change materials as the heat dissipation medium for lithium-ion batteries for electric vehicles, and discussed the heat dissipation of lithium-ion batteries for electric vehicles.
After selecting the temperature range, initial conditions and boundary conditions, this paper selects the SolidWorks software to model and analyze the single cell first. The whole battery pack is modeled, and the lithium-ion battery pack is used with the flow simulation plug-in of SolidWorks. The simulation was performed and the results were obtained to complete the heat dissipation requirements for the lithium ion battery.
Keywords：electric vehicles；Li-ion battery；phase change material；battery cooling
 
目录
第1章绪论    1
1.1 研究背景    1
1.2 课题研究的目的、内容与意义    2
1.2.1 目的及内容    2
1.2.2 课题研究的意义    3
1.3 主要研究方法    3
1.4 国内外研究现状    3
1.5 本文的创新点    4
1.6 本章小结    4
第2章电动汽车锂离子电池散热概述    5
2.1 纯电动汽车概述    5
2.1.1 纯电动汽车的定义    5
2.1.2 纯电动汽车国内外发展现状    5
2.2 动力电池的类型与要求    5
2.3 动力电池发展历程    6
2.4 电动汽车锂离子电池简介    7
2.4.1 锂离子电池构成    7
2.4.2 锂离子电池工作原理    8
2.4.3 锂离子电池结构    8
2.4.4 锂离子电池主要性能参数    9
2.5 锂离子电池温度特性    10
2.6 锂离子电池热失控的成因    10
2.7 锂离子电池热量过高的危害    10
2.8 锂离子电池散热的几种主要方式    11
2.9 锂离子电池热管理研究现状    14
2.10 锂离子电池热分析理论    14
2.10.1 传热的形式    14
2.10.2 电池产热理论    16
2.10.3 传热过程简介    17
2.11 本文选择的冷却方式    17
2.12 本章小结    17
第3章锂离子电池模型建立    18
3.1 SolidWorks软件介绍    18
3.2 锂离子电池建模仿真    18
3.2.1 单体电池建模    18
3.2.2 初始条件设定    18
3.2.3 锂离子电池模型建立    19
3.2.4 流体子域设定    22
3.2.5 边界条件    23
3.2.6 全局网格设置    24
3.2.7 单体电池体积热源    25
3.2.8 目标    25
3.3 本章总结    26
第4章相变材料散热的仿真结果    27
4.1 相变材料的选择及仿真准备    27
4.2 温度分布仿真    28
4.3 锂离子电池工作温度的分布图    29
4.4 本章小结    32
第5章总结与展望    33
5.1 总结    33
5.2 展望    34
第6章致谢    35
第7章参考文献    37